Wireless - TP-Link TL-WR841HP Quick Installation Manual

Chapter 4
2. Go to Network > MAC
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.
4. 4.

Wireless

4. 4. 1. Basic Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Basic
3. Configure the basic settings for the wireless network and click Save.
Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is
WAN MAC Address
Settings.
Configure the Router as a Standard Wireless Router
to restore the MAC address of WAN
field.
Clone MAC Address
28