TP-Link TL-WR841HP Quick Installation Manual page 31

Chapter 4
• Connect/Disconnect
• Dynamic IP/ Static IP
please enter the IP address, subnet marsk, gateway and DNS also provided by your
ISP.
• Internet IP Address/ Internet DNS
assigned by L2TP server.
• Connection Mode
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Automatically
when it is down.
• Connect Manually
immediately. This mode also supports the
on Demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note: Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
4. 3. 2. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• IP Address - Enter the IP address in dotted-decimal notation of your router (factory
default - 192.168.0.1).
- Click this button to connect or disconnect immediately.
- Select either as required by your ISP. If
- The internet IP address and DNS server address
- In this mode, the internet connection can be terminated
- The connection can be re-established automatically
- You can click Connect/Disconnect
Configure the Router as a Standard Wireless Router
to connect/disconnect
Max Idle Time
Static IP is selected,
Max Idle Time
function as Connect
Max Idle Time because some
26