TP-Link TL-WR841HP Quick Installation Manual page 68

Chapter 4
PPPoEv6
• PPP Username/Password
your ISP. These fields are case-sensitive.
• Authentication Type
CHAP and MS-CHAP.
• Addressing Type
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
• MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1480 Bytes. It is not recommended that you change the
default MTU size unless required by your ISP.
• Enable MLD Proxy
function if you need.
• Use IPv6 address specified by ISP
• Set IPv6 DNS Server manually
and secondary IPv6 DNS server.
Configure the Router as a Standard Wireless Router
- Enter the User Name and Password provided by
– Choose one authentication type from AUTO-AUTH, PAP,
- There are two types of assignation for IPv6 address:
- Enable the Multicast Listener Discovery (MLD) Proxy
- Input a static IPv6 address from the ISP.
- Enter the IP address of the IPv6 DNS server
63