FASTRON. VISION Series Programming Manual page 2

Important Notices
FAST is not liable for any use
of product not in accordance
with its installation and operating
instructions.
Before using this equipment, or
for any questions on the opera-
tion of the appliance, consult and
follow all instructions and safety
warnings found in the appliance
operator's manual supplied from
the manufacturer of the appli-
ance.
Not all features are available on
some models.
Controller Operating Environment
The solid state components in this controller are
designed to operate reliably in a temperature range
up to 158°F/ 70°C. Before installing this controller,
it should be verified that the ambient temperature
at the mounting location does not exceed 158°F/
70°C.
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
2
Vision Vertical Oven Controller
Cleaning the Controller
Using a clean damp cloth, wipe down your
controller daily.
Do not allow oil to build up on any part of the
controller.
NEVER use chemical or abrasive cleaners
on your controller. The controller's overlay
may be damaged.
www.fastinc.com 1-800-243-9271
229-51414C © 2008-2010 FAST