Engine Cover Service - BRP E200HSLSEA Service Manual

ENGINE COVER SERVICE

LOWER COVER SERVICE
Latch Handle Installation
Apply a light coat of Triple-Guard grease to latch
handle shaft. Insert handle into lower cover.
1. Triple-Guard grease
Apply Ultra-Lock to screw threads. Place spring
washer and hook into position and tighten screw
to a torque of 180 in. lbs. (20 N·m).
92
Trim Switch Installation
Place switch into position through cover.
1
006827
Install nut on switch. Tighten nut to a torque of 10
to 16 in. lbs. (1 to 2 N·m).
Install electrical connector. Refer to CONNEC-
006821
TOR SERVICING on p. 160.
006746
006747
006748