Oil Filters and Oil Reservoir
Perform visual inspections to identify oiling system
leaks. Make certain the oil tank is filled and oil
supply is not contaminated.
Evinrude E-TEC V model outboards are equipped
with two serviceable oil filters: one is located in the
oil injection tank, and one is located in the oil sup-
ply line before the oil lift pump.
Sample oil from bottom of oil injection tank. Con-
firm that oil is free of water or other contaminants..
1
1. Filter, oil supply line
2. Filter, oil injection tank
Air Silencer
The air silencer on Evinrude outboards maximizes
air flow while minimizing noise.
Routine cleaning of the air silencer is recom-
mended to remove any accumulation of debris.
2
Hoses and Connections
Check condition of all hoses and connections in
both the fuel and oil systems:
004250
Visually inspect all components.
•
42785
Observe all clamps, hoses, and connections
•
while outboard is running.
Replace all damaged components.
•
Repair all leaks.
•
Failure to check for fuel leakage could
allow a leak to go undetected, resulting in
fire or explosion.
MAINTENANCE
FUEL AND OIL SYSTEMS
WARNING
3
004218
83