Getting started
(U)SIM Card and Battery
When you subscribe to wireless services you will receive a (U)SIM Card
(subscriber identity module), which contains information about your
network services and your mobile number.
Please consult with your SIM card provider, network service provider or
network operator to obtain and use SIM‐based information.
Insert (U)SIM Card and Battery
Power off the phone and ensure the adapter is disconnected from the
phone before removing the battery.
1.
With the phone back facing upward, slightly press and push the
rear cover toward the phone bottom until the cover is removed.
2.
Remove the battery.
Insert the SIM card into marked SIM slot with the golden chip
3.
facing down.
Install the battery, ensuring contacts are aligned.
4.
5.
Push the back cover back to the original place.
Recharging the Battery
When the battery power is low, the phone will display a low power
notification with a flickering battery icon with zero bars. When the battery
is low, some functions of the phone might not operate until the battery
receives a full charge.
When the power is lower than the threshold value, the phone will
automatically power off until it is recharged. When the phone is
powered‐on and being charged, the battery icon on the top‐right corner of
the display will flicker to show it is being recharged. When the battery is
fully charged, the prompt of "charge completed" is displayed on the
top‐right corner of the screen. When the phone is powered‐off and being
charged, the charging status is displayed on the screen; after charging has
finished, the prompt of "charge completed" is displayed on the screen. It
takes approximately 2.5 hours to fully charge the battery. Be sure to fully
6