Table of Contents
Advertisement
1.
Main menu > Settings > Call settings > Call waiting > Check Status.
Confirm if Call Waiting is enabled or disabled. To change the setting
2.
select ON or OFF
3.
After activating the call waiting, if there has new incoming call during
calling, the phone will display the call waiting window and the
message prompt.
4.
To switch between the two calls select SWITCH
This feature requires support of the network. Please contact your
network supplier.
Multi‐party calls
Making a call during an existing call
1.
During a call, select OPTION and select NEW CALL
2.
Input the number of new call and select the SEND key to initiate the
second call.
3.
To switch between the two calls select SWITCH.
4.
To end the call, select the END/POWER key.
Multi‐Party Calls
You can accept multi party calls by connecting your existing call to an
incoming call. In addition, you can initiate multi‐party calls, adding up to
six participants.
1.
When on the phone within the first participant, select OPTION and
select CALL MEETING
2.
To end the conference call, you can select OPTION and END CALL
MEETING.
3.
To terminate one party from the call select OPTION and select
HANGUP ONE, then select the number to be disconnected from the
conference.
4.
To cancel the conference call to make a single call, select OPTION and
select SPLIT.
This feature requires the support of the network. Please contact your
18
Advertisement
Table of Contents
