Full Installation - Cartft FLEETPC-ARM-300 Quick Start Manual

FLEETPC-ARM-300 Quick Start Guide

3.2 Full Installation

You need to prepare the following devices and accessories before full installation:
 One FLEETPC-ARM-300
 One 3G or LTE SIM Card
 Note: 3G or LTE module has to be purchased separately
 One network cable and one PC (Windows), or
 One mobile phone/tablet/PC/NB device with WiFi function
 One PC (Windows), which can be installed OpenGTS server software
Before starting full installation, make sure you have successfully completed the basic
installation steps described in previous section.
If it is not properly installed, please complete basic installation first.
 OpenGTS server Installtion
Please refer to Appendix B or Appendix C for detailed OpenGTS server installation.
3.3 Remote Access
FLEETPC-ARM-300 is pre-installed a VNC server allowing remote PC (Ubuntu or
Windows) to connect to FLEETPC-ARM-300 via LAN port or WiFi. This feature
enables remote PCs to monitor and control FLEETPC-ARM-300 without a local LCD
display.
Please refer to Appendix D for information about how to use Remote Access.
Page 16