Basic Installation - Cartft FLEETPC-ARM-300 Quick Start Manual

FLEETPC-ARM-300 Quick Start Guide
3 FLEETPC-ARM-300 Installation
FLEETPC-ARM-300 installation is divided into two portions, basic installation and full
installation. You are allowed to perform the following functions after completing basic
installation:
(1). A PC (or a mobile phone, a tablet with WiFi function) is connected to internet
through FLEETPC-ARM-300, and
(2). A PC (or a mobile phone, a tablet with WiFi function) may communicate
FLEETPC-ARM-300 device manager using browser for enquiring various VPC I/O
settings, GPS coordinates, etc. For more information about detailed functions of
FLEETPC-ARM-300 device manager, please refer to Appendix A in this manual.
You are allowed to perform the following functions after completing full installation:
(1). All functions completed under the basic installation
(2). FLEETPC-ARM-100 can send information (GPS, I/O, etc.) to remote Server OpenGTS
For more information about the installations, please refer to "Section 3.1 Basic
Installation" and "Section 3.2 Full Installation".
Page 11