Control Elements - Bauer MSXH Operating Manual

6.3.2 Control elements

Main switch red for power supply
Turn-switch black for manual or interval operation
Reset key red for probe 1
Reset key red for probe 2
Main switch
6.3.3 Connections
Power supply by means of 5-pole connecting cable directly attached to ingoing terminal.
Mixer connected to terminal strip in control box.
Warning:
Electrical connections must be carried through by approved eldctricians only!
Before tunring power supply on check tight fit of all screws and terminals.
Fuse protection of power supply see Technical Data
6.3.4 Settings
Motor protecting relay: see drawing no.: 018 2565.4 automatic reset
Interval operating: Programming by means of control unit LOGO see 6.2
6.3.5 Start-up
Operating Manual for BAUER Submersible Mixer/ Version I-2013
Put main switch to position 1
(see page 38)
26