Initial Operation Of Timer Logo - Bauer MSXH Operating Manual

BAUER Control unit LOGO with timer for interval operation
Logo programming

6.2.2 Initial operation of timer logo

Before the initial operation the control panel has to be connected correctly according to the connection diagram.
Put switch „Hand 0 Intervall" to 0.
After putting on the main switch time and date are blinking on the display
Date and time keep blinking until they are set.
Mo 15:30
2006-02-16
Setting of time and date
Press key ESC
The display is showing the following
> Stop
Set Parameter
Set
Prg Name
Operating Manual for BAUER Submersible Motor Mixer / Version l-2013 19