6 PUTTING INTO OPERATION
When the motor mixer is put into operation for the first time make sure the supply voltage complies with the
voltage specified on the motor nameplate.
Before connecting the motor check the phase sequence for the turning direction of the motor.
The motor mixer must work thrustwise.
When looking onto the propeller it must turn anti clock wise!
Never put the mixer into operation before having submerged it into the slurry.
When connecting the motor strictly observe all regulations concerning electrical equipment as well as the
instructions of the motor manufacturer (e.g. motor protection switch, possible locking of circuit breaker).
Check setting of motor protection switch, see 018 2565.4, page 38
WARNING !
Oil level checking screw
Bring submersible motor mixer in a horizontal position.
Open oil level checking screw.
Oil level must reach rim.
When the mixer has been set correctly and the leak detector has been activated, power supply will be turned off
by the tripping device whenever the gear oil is polluted because of a defective seal.
Operating Manual for BAUER Submersible Mixer/ Version I-2013
Check oil level in planetary gear before starting the machine! (Quality and quantity
of oil see Technical Data).
16