Bauer MSXH Operating Manual page 21

B 9 Weekly clock timer
Every weekly clock timer has three cams for adjusting (B9 / 1,2,3), where you can parameterize a time window.
Set the switching point and the stop position with the cams. The weekly timer puts on the interval operation at the
switching point and off at the stop position.
Timing point:
--:-- means week day not chosen
Parameterizing window
This is how the parameterizing window B9/1 looks like (factory setting)
B9
D =MTWTFSS
On = 22:00
Off = 04:00
The letters behind the letter D (for day) refer to the weekdays
M : Monday
T : Tuesday
W: Wednesday
T : Thursday
F : Friday
S : Saturday
S : Sunday
The capital letter means: weekday chosen
ON – means weekday not chosen
B 9 Setting of weekly timer
This is how to enter timing points:
Press key ESC
The display is showing the following
>Stop
Set Param
Set
Prg Name
Confirm with key ▼ and choose „Set Param" and confirm with key OK
Operating Manual for BAUER Submersible Motor Mixer / Version l-2013
Every time between 00:00 and 23:59 o´clock possible
1
21