Mounting Instructions - Bauer MSXH Operating Manual

4 MOUNTING INSTRUCTIONS

4.1 Mounting of guide tube and guide tube bracket
Slip the guide tube bracket over the guide tube and secure it at the silo edge / pit cover. Use a level to bring the
guide tube into vertical position. Set and secure the bottom bearing accordingly. Make sure the stop plate of the
bottom bearing is in front of the guide tube (beneath the mixer).
4.1.1 Reinforced Lift Pole
ATTENTION
!
4.2 Mounting of cantilever arm and winch
Put the cantilever arm onto the guide tube and mount the holder for the winch and the crank with the clamping
lugs according to the drawing.
Operating Manual for BAUER Submersible Motor Mixer / Version l-2013
After mounting fill up with concrete .
See drawings 6171297.1 and 6179950.3 on pages 47 and 48
stop plate
13