Table of Contents
Advertisement
1. Handgrip
2. Protractor
3. On/off switch
4. Power cord
5. Saw blade safety guard
6. Hexagon screw
7. Soleplate
8. Retaining ring
9. Saw blade
10. Rip fence
11. Rip fence clamping knob
12. Sawing angle clamping knob
- Shaft locking knob
13. Laser switch
4. UNPACKING
The circular handsaw is shipped with:
1 Rip fence
1 TCT Saw blade Ø 185 mm
1 Allen key
1 Set of carbon brushes
2 Batteries
1 Dust extraction adapter
Check first whether or not the product has been
damaged by transport and/or whether all the
parts are present.
5. SAFETY INSTRUCTIONS
The following pictograms are used in these
instructions for use:
Danger of bodily injury or material
damage.
Indicates electrical shock hazard.
In accordance with essential appli
cable safety standards of European
directives
Class II equipment – double insulated
– the plug does not have to be earthed
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from
the mains electricity in the case that
the cord gets damaged and during
maintenance
Wear eye and ear protectors
Caution! Laser beam! Never look into
the light beam and never aim the laser
at a person when it is switched on.
Electrical or electronic devices and
machines, which are damaged and/or
are to be discarded, must be delivered to
the recycling stations provided by local
regulations.
5.1 Electrical safety
When using electric machines always obser-
ve the safety regulations applicable in your
country to reduce the risk of fire, electric
shock and personal injury. Read the following
safety instructions and also the enclosed safety
instructions. Keep these instructions in a safe
place!
Always check that the power supply
corresponds to the voltage on the
rating plate.
37
Advertisement
Table of Contents
