Digital Watchdog DWC-LPR650U User Manual page 19

OSD Menu Exposure
_
BACKLIGHT
2
OFF
HME HIGHLIGHT MASKING EXPOSURE
HME allows objects to appear clearly on the screen by
masking extremely bright areas. To setup HME, set the
level and color. The lower the setting, the darker the
masking areas have to be. Select from: 0 ~ 20.
Color: Set the color of the HME mask. Select from:
BLACK / WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE / CUSTOMIZE
BLC BACK LIGHT COMPENSATION
If BLC is selected, adjust the size and position of the mask:
- H-POS: Move the Zone position left or right. The higher the number,
the zone will move to the right.
- V-POS: Move the Zone position up or down. The higher the number,
the zone will move down.
- H-Size: Reset the zone's size horizontally. The higher the number,
the right side panel will move further to the right.
- V-Size: Reset the zone's size vertically. The higher the number, the
bottom side panel will move further down.
EXPO RGB
LENS
2 BACKLIGHT
DRC
DEFOG
AGC
3D DNR
EXIT JUMP
19
EXPOSURE
D&N FUNC MOTI PRIV SET EXIT
AUTO
HME
OFF
OFF
3
OFF
BACKLIGHT
H-POS 6
V-POS 6
H-SIZE 8
V-SIZE 8
RETURN