Specifications Of The Wifi Extension Card - eWON FLB 3271 Installation Manual

- Note -
If all signal level LED's are off, it may mean either that:
the WIFI interface is not activated in the eWON configuration
there is no signal at all (level 0)
there is a reception error (level XX)

3.4. Specifications of the Wifi Extension Card

Item
Protocols and Frequencies
Antenna Connector
Antenna
(included in the delivery)
Device conformity has been tested with the reference antenna: Pulse W1030.
Absolute maximum antenna gain as per FCC's rules and regulations, 47CFR:
• Part 15C : 2.14dBi.
- Important -
This device is to be used only in fixed applications. The antenna used for this transmitter has to
be installed to provide a distance of at least 20 cm from any person and may not be co-
located or operating in conjunction with any other antenna or transmitter.
Page 9 / 19
Value(s)
IEEE802.11b/g/n, 2.4-2.5GHz
Type SMA-F Male (SMA reverse polarity)
Charact. Value(s)
Impedance 50 Ohms
> 17 dBm, IEEE 802.11b
Input Power
> 15 dBm, IEEE 802.11g/n
Tightening 0.5 Nm. In the absence of a torque wrench, a
Torque soft manual tightening is sufficient.
eWON Flexy
Hardware Description
WiFi Extension Card FLB 3271 | IG 020
Chapter 3