The reference code of the Extension Cards includes a letter that defines their compatibility
either with "A" slots, "B" slots or both:
FLA xxxx - designates cards that fit into "A" slots
•
FLB xxxx - designates cards that fit into "B" slots
•
FLX xxxx - designates cards that fit into both "A" and "B" slots
•
In addition to the card reference, each type of extension card bears a visual compatibility
symbol on its front panel. The visual symbols are shown in the table below:
●●○○
●●●●
○○●●
3.6.3. Extension Card Insertion
Please wait 30 seconds after powering off the equipment before inserting (or removing) an
extension card. This is to avoid possible damage to the Base Unit and Extension Card.
Remove the slot filler of the location where you want to insert the new card. To do this, press
on both ends of the cover, note that the hooks are off-centered like shown on the pictures.
Page 11 / 19
2 first slots only (A)
In any slot (X)
2 last slots only (B)
eWON Flexy
Hardware Description
WiFi Extension Card
FLB 3271 | IG 020
Chapter 3