Safety, Environmental & Regulatory Information - eWON FLB 3271 Installation Manual

2. Safety, Environmental & Regulatory Information
2.1. Scope
This section addresses Safety, Environmental & Regulatory Information for the Wifi Extension
Card FLB 3271. This Extension Card belongs to the same compliance frame as the Base Units.
In the case of a telecommunication Extension Card, additional directives, standards and instructions
apply.
2.2. ESD Damage Prevention
- Important -
Contains parts and assemblies susceptible to damage by electrostatic discharge (ESD). Always
use ESD precautions when handling Extension Cards and the opened Base Unit.
The Extension Card is a module exposing both sides of an electronic printed circuit board.
Therefore, it is packed in antistatic ESD bags. In order to avoid ESD damage, the product
must be handled with the necessary precaution including:
• Grounded ESD protective work surface
• Personnel grounding
2.2.1. Applicable Directives, Standards and Compliance
The Extension Card complies with the R&TTE directive 1999/05/EC and the FCC regulations
related to the wireless modems.
The Extension Card belongs to class A Information Technology Equipment (ITE). In a
domestic environment this product may cause radio interference in which case the user
may be required to take appropriate measures.
2.2.2. Applicable European Directives
The Extension Card is in conformity with the following EC directives:
• RoHS Directive 2011/65/EU
• EMC Directive 2004/108/EC
• R&TTE Directive 1999/5/EC
The product conforms to the corresponding R&TTE articles: RF spectrum efficiency (Art
3.2); EMC (Art. 3.1b); Safety (Art. 3.1a)
Page 4 / 19
Safety, Environmental & Regulatory Information
eWON Flexy WiFi Extension Card
Chapter 2
FLB 3271 | IG 020