Timesource - Symmetricom TimeSource 3000 Manual

S S S S S S S
Retrieve Communication (cont'd)
4
150
S S S S S S S S S
The parameters which may be displayed in the <spec block> are listed below.
Parameter
MONMSG=a a = ALW
a = INH
KEEPALIVE=a a = 1 to 255
a = 0
ENDOFTEXT=a a = 1 to 9F
a = 00
ECHO=a a = ALW
a = INH
COMPRI=a a = ALW0
a = ALW1
a = ALW2
a = INH
S S S S S S S S S
Value
View messages from all ports
View messages from this port only
Inactive minutes until the unit sends a
COMPLD message to keep the connection
from being closed
No COMPLD message is output
Hex code at end of all responses
No hex code at end of responses
Echoes characters received so they appear on
the user's screen as typed
Local echo is disabled
TL1 commands and responses, no
autonomous messages sent
TL1 commands and responses, sends
autonomous messages
TL1 commands and responses, sends
autonomous messages whether or not logged
on
Closes connection, logs off a user (if logged
on), and keeps port from use (a port cannot
close itself)
S S S S S S S S S
Description

TimeSource 3000

097-72000-02 Issue 6: October 2003
S S S S S
TL1 Reference