Initialize System - Symmetricom TimeSource 3000 Manual

S S S S S S S

Initialize System

4
144
S S S S S S S S S
This command resets the specified processor.
Caution:
Using this command with an <aid> of TS3000 will cause a loss of outputs for
approximately 20 minutes if ALMOUT is SQUELCH, or unstable outputs if ALMOUT is not
SQUELCH.
The command format is:
INIT-SYS:[<tid>]:<aid>:<ctag>::1;
Aid
TS3000 System software
GPS GPS receiver software
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
;
S S S S S S S S S
Item Addressed
S S S S S S S S S
TimeSource 3000
097-72000-02 Issue 6: October 2003
S S S S S
TL1 Reference