License Agreement - Miller 14-Pin Insight Core CE Owner's Manual

SECTION 4 − SPECIFICATIONS AND INSTALLATION
7

4-1. License Agreement

You have acquired a device (Insight Core) which includes software licensed by Miller Electric Mfg. Co. Such software products, as well as associated
media, printed materials, and "online" or electronic documentation for such software are protected by international intellectual property laws and
treaties. The software is licensed, not sold. All rights reserved.
4-2. Compatibility Information
Deltaweld Dimension
302
452
652
NT w/Arc Reach
Deposition is reported with 14 pin compliant welding power sources using MPa wire feeders.
Wirefeeders requiring 115 VAC are not compatible with this unit.
Units requiring High Frequency for TIG welding are not compatible with this unit. For information regarding Miller Power Sources not
included in the list, please call ISG Service at 920−954−3809.
266 098 Page 12
Compatible Power Sources
Goldstar
302 302
452 452
652 652
1000
NT 450
Use ONLY with compatible
power sources or equipment
damage may occur.
• Do not use with Dynasty®, Maxstar®, or
Syncrowave® power sources.
• Read Owner's Manual to check
compatibility.
Utiliser des sources de courant
compatibles SEULEMENT,
sinon un bris d'équipement
pourrait survenir.
• Ne pas utiliser avec les sources de
courant DYNASTY, MAXSTAR ou
SYNCROWAVE.
• Lire le manuel d'opérateur pour vérifier
la compatibilité.
Invision
350 MPa
352 MPa
354 MP
450MPa
456MP
456 P
NOTICE
AVIS
267353-A
XMT Alumapower
304 CC/CV 350 MPa
350 CC/CV 450 MPa
350 MPa
450 CC/CV
450 MPa
456 CC/CV
Ref. 267 353-A