Running Configuration App For Installation Of Firmware And Connection Criteria - Miller 14-Pin Insight Core CE Owner's Manual

4-8. Running Configuration App For Installation Of Firmware And Connection Criteria

.
The application provides the ability to update the firmware on your Insight Core module, set the device for a wired Ethernet connection, or set it
for a wireless Wifi connection.
1. To run the application, double-click on the shortcut that was automatically installed on your desktop, or on the program (.EXE) file inside the
application listed in All Programs (see Figure 4-11).
2. The application will automatically check to see if a newer version of the application exists. If so, you will be prompted to replace your version with
the most recent version (see Figure 4-12).
If you are running the application on a computer that is not connected to the internet, this automatic version check will fail, enabling you to continue using
the current version you have installed by clicking OK, or cancelling in order to re-establish an internet connection (see Figure Figure 4-13).
266 098 Page 20
Figure 4-11. Setup Application Shortcut
Figure 4-12. Checking For Newer Version Of Application
Figure 4-13. Internet Connection Message Screen