Setting Up A Group - Miller 14-Pin Insight Core CE Owner's Manual

4-16. Setting Up A Group

1. To set up a group to organize your Insight devices into logical groups, click on the Groups tab (see Figure 4-40).
2. Enter a Group Name and click on the Save button (see Figure 4-41).
3. Once a group is established, return to the beginning of Section 4-14 to add more devices. Be sure to have all the serial numbers and access keys
for each additional device.
4. To assign existing devices to a group, click Configuration, then Devices and use the Configure link to set the device properties, including assign-
ing the device to a logical group.
266 098 Page 38
Figure 4-40. Setting Up A Group Of Devices
Figure 4-41. Entering A Group Name