Miller 14-Pin Insight Core CE Owner's Manual page 36

13. On the server page, locate the radio button labeled Wireless WiFi and enter the desired parameters based on your company's network environ-
ment as defined on the Insight Network Connectivity Requirements Checklist responses (see Figure 4-25).
.
This server page IP address (169.254.0.2) is the factory default for the Insight module. If you plan to set the Insight device connectivity to use
static IP address in your company, this server page IP address will change permanently once you assign the static IP in the process below.
14. Assigning a Static IP address enables you to view the server page of any Insight device installed on the shop floor from anywhere on your net-
work by browsing to its static IP address.
266 098 Page 30
MC10001Z
AC1000000X1X1X00XX00X0
Figure 4-25. Insight Server Page