Build And Run The Z51F0811 Demo Project - ZiLOG Z51F0811 MCU User Manual

Z51F0811 MCU Evaluation Kit
User Manual
12
Build and Run the Z51F0811 Demo
Project
Observe the following procedure to build and run the Z51F0811 demo project.
1. Browse to the following location and double-click the
Note: Refer to the
these project files and Small Device C Compiler (SDCC) development tools.
2. When the build is complete, the command window will prompt the user to press any
3. Set up the OCD and Evaluation Board. If you have not already configured these items,
4. Run the Z8051 OCD software. From the

Build and Run the Z51F0811 Demo Project

build the project:
<Z8051 Installation>\Z8051_<version>\samples\Z51F0811\Demo\build_sdcc.bat
Z8051 Tools Product User Guide (PUG0033)
key to continue. Proceed by pressing any key on your keyboard; as a result, a hex file
for the demo will be created in the following path:
<Z8051 Installation>\Z8051_<version>\samples\Z51F0811\Demo\demo.hex
please return to the Configure the Z8051 OCD and Z51F0811 Evaluation Board
tion on page 10.
Zilog Z8051 Software and Documentation <version_number>
OCD <version_number>
shown in Figure 9.
Start menu, navigate to
. Once launched, the program will display Connected, as
batch file to
build_sdcc.bat
for additional information about
All Programs
→
Zilog Z8051
UM024201-0212
sec-
→