Table of Contents
Advertisement
Install the Z8051 OCD Software and
Documentation
The Z8051 On-Chip Debugger (OCD) interface is the interface by which your PC will
communicate with the Z51F0811 MCU to download and execute code. In addition to the
OCD, software such as development tools and sample applications will be installed.
Observe the following procedure to install the Z8051 On-Chip Debugger software and
documentation on your computer.
1. Ensure that the OCD interface hardware is not connected to your PC.
2. Insert the Z8051 Software and Documentation CD into your computer's CD-ROM
drive. The setup program launches automatically. If the setup program does not launch
automatically, open Windows Explorer, browse to your CD-ROM drive, and double-
click the file labeled
Note:
In this filename,
For example, this version number may be
3. Follow the on-screen instructions to complete the OCD software installation.
Z8051 OCD Driver Installation
The driver programs for the Z8051 On-Chip Debugger are copied during the software and
documentation installation. In the following procedure for Windows XP systems, ensure
that the target side of the OCD will remain unconnected while you install these drivers.
Refer to Figure 3 for guidance.
Note:
If you are running Windows Vista, see
ers. If you are running Windows 7, see
UM024201-0212
Z8051_<version>.exe
<version_number>
Figure 3. An Example Setup
Z51F0811 MCU Evaluation Kit
.
refers to the version number of the OCD software.
.
1.0
[to be supplied]
Appendix A
on page 22 to install your device driv-
Appendix B
on page 28.
Install the Z8051 OCD Software and Documentation
User Manual
5
Advertisement
Table of Contents
