Advertisement
Quick Links
Introduction
This Quick Start Guide helps you to get started with the Z8 Encore! XP
Flash MCU Evaluation Kit, and provides instructions on setting up and using the tools to
start building designs and applications.
Kit Contents
The kit contents of the Z8 Encore! XP F0822 Series Flash MCU include the following:
Hardware
The hardware included in Z8 Encore! XP F0822 Series Flash MCU Evaluation kit are as
follows:
•
Z8 Encore! XP F0822 Series Flash MCU evaluation board
•
Smart Cable for PC to Z8 Encore! XP F0822 Series Flash evaluation board (DB9 to six-
pin male)
•
Universal Power supply
Software (on CD-ROM)
The following software are included with the Z8 Encore! XP F0822 Series Flash MCU
Evaluation kit:
•
Zilog Development Studio II (ZDS II) – Z8 Encore! Integrated Development
Environment (IDE) with ANSI C-Compiler
•
Sample code
•
Acrobat Reader install program
•
Document browser
Documentation
The following documents are included in the Z8 Encore! XP F0822 Series Flash MCU
Evaluation kit:
•
Registration Card
•
Z8 Encore! XP technical documentation (on CD-ROM)
–
ZDS II - IDE User Manual
Z8 Encore! XP
Series Flash MCU
Evaluation Kit
Quick Start Guide
Copyright © 2007 by Zilog
www.zilog.com
®
F0822
®
, Inc. All rights reserved.
QS002507-1207
®
F0822 Series
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ZiLOG Z8 Encore! XP F0822 Series Flash MCU
Summary of Contents for ZiLOG Z8 Encore! XP F0822 Series Flash MCU
- Page 1 Flash MCU Evaluation Kit, and provides instructions on setting up and using the tools to start building designs and applications. Kit Contents The kit contents of the Z8 Encore! XP F0822 Series Flash MCU include the following: Hardware The hardware included in Z8 Encore! XP F0822 Series Flash MCU Evaluation kit are as follows: •...
-
Page 2: Supported Host Environments
1. Connect the serial port of the PC to the Z8 Encore! Smart Cable DB-9 connector. 2. Connect the Z8 Encore! Smart Cable to the Z8 Encore! XP F0822 Series Flash MCU evaluation board pin header P2. 3. Connect the power supply to the evaluation board at J1 (see... - Page 3 ® Z8 Encore! XP F0822 Series Flash MCU Evaluation Kit Depending up on which build of this kit you receive, it may contain either a Note: universal power supply containing two or four location-specific plug configurations or a 110 V AC wall plug that cannot be modified. Serial Port Smart Cable...
- Page 4 ® Z8 Encore! XP F0822 Series Flash MCU Evaluation Kit 3. Slide the new plug configuration into the slot until it snaps into place. 4. Plug the power supply into an electrical outlet. Hewlett Packard Power Cord Method Follow the steps below to connect the Universal power supply by the Hewlett Packard power cord method: 1.
- Page 5 7. If you elected not to register at this time, a reminder screen appears after installation asking you to register the product online at www.zilog.com. To register at a later time the registration link to the internet site is found in the ZDS II Help menu.
- Page 6 4. Select Open Project from the File menu. The Open Project dialog box appears. See Figure Figure 3. Open Project Dialog Box (Reference Only) 5. Browse to the samples directory: Program Files ZiLOG ZDSII_<product>_<version number> Samples 6. Select Samples. The samples folder appears (See Figure Z8F08xx_ledBlink Figure 4.
- Page 7 ® Z8 Encore! XP F0822 Series Flash MCU Evaluation Kit Figure 5. src Folder (Reference Only) 8. Select the file. The initial ZDS II program screen opens (See ledblink.pro Figure Figure 6. ZDS II Opening Screen (Reference Only) QS002507-1207 Page 7 of 9...
- Page 8 ® Z8 Encore! XP F0822 Series Flash MCU Evaluation Kit 9. Click the Rebuild All icon and then the Reset icon to connect and Rebuild download the code to the Evaluation board. All Icon Reset Icon 10. Click Go to start the program. The screen changes as displayed in Figure Icon Figure 7.
- Page 9 Z8, Z8 Encore!, Z8 Encore! XP, Z8 Encore! MC, Crimzon, eZ80, and ZNEO are trademarks or registered trademarks of Zilog, Inc. All other product or service names are the property of their respective owners.
Need help?
Do you have a question about the Z8 Encore! XP F0822 Series Flash MCU and is the answer not in the manual?
Questions and answers