Figure 25. Trap log status
You can perform this operation on this panel:
Clear Trap Log
Configuring Telnet
You can manage the switch remotely using a Telnet connection. "Chapter 2.
Accessing the switch" on page 19 describes setting up a Telnet connection. To
configure for Telnet, select Management Menu from the Main Menu, then from the
Management Menu, select Telnet Configuration Menu (Figure 26).
Figure 26. Telnet configuration
44
8275-416 User's Guide
Specify Yes or No. Yes causes the contents of the Trap Log to be erased.
No causes the trap log to continue logging trap information after the last
entry.