Figure 24. Trap log
Each entry contains:
System Up Time
This entry shows how long the system has been up when the trap occurred.
Trap
This entry is the name of the trap condition, which can be:
v Cold Start
v Authentication Failure
v Link Up
v Link Down
v Multiple Users
v New Spanning Tree Root
v Spanning Tree Topology Change
v Broadcast storm start/end
Checking trap log status
To check how many traps have been generated, select Trap Menu from the
Management Menu, then select Trap Log Status Menu from the Trap Menu.
You can choose to clear the trap log on this panel (Figure 25 on page 44).
Chapter 4. Using the Terminal Interface
43