Part Identification Chart - ProForm PFBE1516.0 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST on page 18. Note: Some small parts may have been pre-
attached. If a part is not in the parts bag, check to see if it has been preattached.
M6 Washer (46)
M4 x 12mm
Self-tapping
Screw (61)
M6 x 48mm Screw (56)
M8 x 10mm Set
Screw (55)
M10 x 55mm Button Screw (50)
M10 x 80mm Button Screw (59)
M10 x 90mm Button Screw (47)
M8 Washer (58)
M10 Washer (45)
M6 x 23mm
Screw (53)
M8 x 16mm
Bolt (60)
M8 Nylon
Locknut (44)
M6 x 63mm Screw (54)
M10 x 57mm Bolt Set (49)
M8 x 45mm Bolt (52)
M10 x 70mm Button Bolt (48)
5
M10 Nylon
Locknut (43)