Dishwasher Control Section - Kenmore 722.1467 series Use & Care Manual

Delay Hours
Use this option to run the dishwasher during off-peak hours. Contact your local utility provider to determine off-peak
hours.
Delaying the Start Time
1. Select a wash cycle and options.
2. Press Delay Hours to choose the number of hours to be delayed.
NOTE: The delay time can be set from 1 to 12 hours, in one-hour increments.
Control Lock Option
The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the
buttons, except for the Power button, on the control panel. This feature does not lock the door.
Activating the Control Lock:
Press and hold Half Rack and Eco Wash for three seconds. CL appears in the display once the Control Lock is activated.
Repeat to deactivate.
NOTE: The dishwasher cannot start if the control is locked.
Cycle Indicators and Time Display
After you start the dishwasher, the display counts down the time.
When you select the Delay Hours option, the time display shows the delay time.
Selecting Cycles and Options
Select the cycle and options that best fit the load by referring to the Cycles and Options Information .
Turning OFF/ON the Button and End of Cycle Chimes
Press and hold Mixed Load and Eco Wash for three seconds to toggle sound On and Off.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.
2. Press and hold Start for three seconds. The drain pump activates and the cycle cancels.
3. Once the dishwasher finishes draining, the power turns off.
NOTE: If the dishwasher is powered on and no cycle is selected for four minutes, the dishwasher powers off.

Dishwasher Control Section

Dishwasher Feedback Section
The indicators glow when the dishwasher is washing, drying, sanitizing, and at cycle
completion.
They also glow when the control is locked and/or the delay option is selected.
The Status Display is used to follow the progress of the dishwasher cycle and to show other
information.
Estimated cycle time is displayed in hours and minutes as you make cycle and option
selections.
Canceling a Cycle
19