Parts And Features - Kenmore 722.1467 series Use & Care Manual

Exterior Parts
1
2
3
4
NOTE: Do not remove the safety cover at any time.
Status LED
• Red : Error (See the Error Codes in Troubleshooting section.)
• White (steady): Normal operation
• White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)
• Green: Cycle finished normally.
The green light stays on for 90 seconds.
To keep the green light on until the door is opened, turn the power on, and then press and hold Hi Temp Wash on the
control panel for three seconds until OFF or On appears in the display. The dishwasher remembers this setting until manually
changed.
6

PARTS AND FEATURES

1 Control Panel
5
2 Door Handle
6
3 Front Cover
7
4 Lower Cover
5 Shipping Brace
6 Safety Cover
7 Status LED (3)
8
8 Base
9 Leveling Feet
9