Dishwasher Control Section - Kenmore ULTRACLEAN 665.1456 Series Use & Care Manual

Options
TurboZone
®
Directs water into your casserole or other dishes to
eliminate the need for soaking and scrubbing of
dirty, baked on food soils. For your toughest items,
use the TurboZone ® option with the Pots & Pans
cycle. See loading information.
High Temp
Raises main wash temperature to improve cleaning
for loads containing tough, baked-on food.
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements of the NSF/
ANSI 184 performance standard for soil removal
and for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on a
NSF/ANSI 184 certified dishwasher meet the NSF/
ANSI 184 performance standard for soil removal
and for sanitization efficacy.
At end of the cycle, the sanitized indicator or word
"sanitized", on some models, will glow. If your load
did not properly sanitize, the indicator will flash at
the end of the cycle. This can happen if the cycle
is interrupted, or if the water does not reach the
required temperature. The light goes off when you
open and close the door or press CANCEL.
Turbo Heat Dry
Turns the heat element on after the wash portion
of the cycle is over. Use rinse aid with or without
the Turbo Heat Dry option for best drying results.
Plastic items are less likely to deform when loaded
in the top dish rack.
*The maximum additional water used for any combination of options is 4.8 gal (18.2 L).
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator is lit, all buttons
are disabled. The dishwasher door can still be opened or closed while the controls are locked.
To turn on the Lock:
Press and hold CONTROL LOCK for 3 seconds. The Control Lock indicator will light up. If you press any pad while your
dishwasher is locked, the light flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock:
Press and hold CONTROL LOCK for 3 seconds. The light turns off.
Can be
selected with
H E
SmartWash ®
Pots & Pans
Normal Wash
H E
SmartWash
®
Pots & Pans
Normal Wash
H E
SmartWash ®
Pots & Pans
Normal Wash
Available with
any cycle except
Quick Rinse

Dishwasher Control Section

What it does
Directs all of the
cleaning power of
the dishwasher to
the TurboZone ® area
during certain times
in the wash cycle
Raises the main 0:00 to 0:30
wash temperature
to 135°F (57°C).
Raises the main
wash temperature
to 135°F (57°C)
and the final rinse
temperature to
156°F (69°C).
Turns the heat
element on at the
end of the wash
portion of the cycle.
Added time Added
to cycle Water*
Gallons
(Liters)
0:10 to 2:20 0.0 - 5.0
(0.0 - 18.9)
0.0 - 2.3
(0 - 8.8)
0:10 to 2:20 1.2 - 6.2
(4.8 - 23.3)
0:11 to 0:46 0
17