Assembly - ProForm 850 PFEL5105.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver , an adjustable
wrench , and a rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 21. The second number is the
quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the
parts bag, check to see if it has been pre-assembled.
M8 Split
M8 Washer M8 Jamnut M10 Nylon
Star Washer Wave Washer
Washer (90)–3 (111)–2 (88)–6 (79)–5 Locknut (81)–2
(112)–8
M4 x 32mm
M4 x 16mm
Round Head M4 x 45mm M6 x 20mm Button
M4 x 14mm Round Head
Screw (105)–6 Screw (77)–4
Screw (104)–8 Screw (101)–8 Screw (108)–2
M8 x 43mm Button
M8 x 23mm Shoulder M8 x 23mm Button
Hub Screw (87)–8
Screw (115)–4 Screw (84)–4 Bolt (78)–4
M8 x 69mm Button M10 x 80mm Carriage
Bolt (80)–1 Bolt (82)–2
M10 x 127mm Button Screw (83)–2
5