System Requirements; Set Up Your Device; Install The Software - Toshiba Canvio Home User Manual

NOTE
If you will not be using your CANVIO HOME device often, we recommend that you turn on the sleep mode setting to save power.
See "Turn HDD standby on or off" on page 32

SYSTEM REQUIREMENTS

Operating system
Web browser
Network router

SET UP YOUR DEVICE

1 Connect the AC adapter to the CANVIO HOME device and to a working electrical outlet.
2 Connect the CANVIO HOME to your network router using the provided Ethernet cable. The device turns on automatically
and the indicator lights flash for a few minutes while the device initializes. Wait for the lights to stop flashing before you
go to the next procedure.

INSTALL THE SOFTWARE

NOTE
You can use your CANVIO HOME without installing the software. See XX for instructions.
1 On your computer, go to
Launcher application.
Be sure to use only a 12V DC power adapter that has been approved and supplied by Toshiba.
Always confirm that the power adapter plug (and extension cord plug, if used) is fully inserted
into the power jack, to ensure a secure electrical connection. Failure to do so may result in a
fire, electric shock, or serious injury.
Toshiba does not assume any liability for any damage caused by the use of an incompatible
adapter.
for instructions.
v
®
Microsoft Windows 8(32/64-bit)
v
®
Microsoft Windows 7 (32/64-bit)
v
®
Microsoft Windows Vista (32/64-bit)
v
®
Microsoft Windows XP (32-bit, SP 3.0)
v
®
Mac OS X 10.7 or later
v
® ®
Microsoft Internet Explorer 8 or later
v
® ®
Mozilla Firefox 4.0 or later
v
Google Chrome™ 13 or later
v
® ®
Apple Safari 5.0 or later
http://www.toshibastorage.com/canviohome
10
System requirements
and click the option to download the Canvio
Copyright © 2013 Toshiba