Error Messages - Anritsu Sire Master S331D User Manual

Error Messages

Self Test Error Messages
A listing of Self Test Error messages is provided in Table 2-2.
Table 2-2.
Self Test Error Messages
Error Message
Battery Low
External Power Low
PLL Failed
Integrator Failed
EEPROM R/W
Failed
Out Of Temp.
Range
RTC Battery Low
Battery Cal Lost
Memory Fail
The time and date
Have not been set
on this Site Master.
To set it, after exit-
ing here press
the <SYS> [Clock]
keys.
Press ENTER or
ESC to continue
Note: Page 1-11 provides contact information for Anritsu Service Centers.
Battery voltage is less than 9.5 volts. Charge battery. If condition per-
sists, call your Anritsu Service Center.
External supply voltage is less than 10 volts. Call your Anritsu Service
Center
Phase-locked loops failed to lock. Charge battery. If condition persists
with a fully charged battery, call your Anritsu Service Center
Integration circuit could not charge to a valid level. Charge battery.
If condition persists with a fully charged battery, call your Anritsu
Service Center.
Non-volatile memory system has failed. Call your Anritsu Service
Center.
Ambient temperature is not within the specified operating range. If the
temperature is within the specified operating range and the condition
persists, call your Anritsu Service Center.
The internal real-time clock battery is low. A low or drained clock bat-
tery will affect the date stamp on saved traces. Contact your nearest
Anritsu Service Center.
Battery communication failed. The indicated battery charge status may
be invalid. If condition persists, call your Anritsu Service Center.
The EEPROM test on the Site Master main board has failed. If condi-
tion persists, call your Anritsu Service Center.
The time and date are not properly set in the Site Master. If condition
persists, call your Anritsu Service Center.
Chapter 2 Functions and Operations
Description
2-19