Section 3: Create a new project and test
Select a custom test
To select a custom test:
1. Select Tests.
2. Select Custom Test, then select Add to create a new 3-terminal, n-type MOSFET test in the
project tree.
3. Select Rename from the toolbar. Enter a test name in the text box, then select Enter. vds-id
was chosen for this example.
Configure the test
To configure the test:
1. Select Configure.
3-6
Figure 20: Custom Test option
Figure 21: MOSFET_TEST project tree with one device and one test
Figure 22: Configure highlighted
Model 4200A-SCS Parameter Analyzer User's Manual
4200A-SCS-900-01 Rev A. / September 2016