Storage Drives In Optional Storage Drive Bays - Lenovo ThinkStation P720 Hardware Maintenance Manual

6. Position the flex module cover on the flex module. Ensure that the rail guides on the bottom of the cover
engage the rails on the flex module. Then, push the cover to the front of the flex module until it snaps
into position.
Figure 185. Reinstalling the flex module cover
7. Install the flex module into the flex bay. Reconnect any removed cables to the flex module.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 220.

Storage drives in optional storage drive bays

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
One of the following types of storage drive bracket can be used in the optional storage drive bay:
Figure 186. Two types of storage drive bracket
To remove or install a storage drive in the optional drive bays, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 103.
2. Locate the optional storage drive bay. See "Internal storage drives" on page 40.
3. Lay the computer on its side for easier access to the optional storage drive bay.
200
P720 Hardware Maintenance Manual