4. To remove a 2.5-inch storage drive with a converter in a type
a. Flex both sides of the bracket to remove the converter from the bracket.
Figure 89. Removing the converter from the type
b. Lift the tab
1
of the metal bracket and push the metal bracket with force as shown. Then slide the
bracket and remove it from the plastic frame.
Figure 90. Removing the metal bracket from the plastic frame of the converter
c. Carefully flex both sides of the metal bracket to remove the storage drive from the bracket.
Figure 91. Removing the storage drive from the metal bracket of the converter
5. To install a new 2.5-inch storage drive with a converter in a type
a. If the converter is installed in the bracket, flex both sides of the bracket to remove the converter from
the bracket.
2
bracket, do the following:
2
bracket
2
bracket, do the following:
.
Chapter 9
Hardware removal and installation
143