Lenovo ThinkStation P720 Hardware Maintenance Manual page 195

4. Lift the clip 1 on the rear of the flex module and slide the flex module cover to the rear to remove the
cover.
Figure 162. Removing the flex module cover
5. Press the two clips toward each other as shown and then pull the eSATA connector or IEEE 1394
connector out of the flex module.
Figure 163. Removing the eSATA connector or IEEE 1394 connector from the flex module
6. To install a new eSATA connector or a new IEEE 1394 connector, do the following:
.
Chapter 9 Hardware removal and installation
189