Ventilation - InFocus INF8630eAG Hardware Manual

Ventilation

• Maintain a distance of at least 1.98" (5 cm) between the display and the wall to provide adequate ventilation, if the display is
installed against the wall.
• Locate the display at least 4' (1.2 m) away from heating and cooling vents.
• Do not block ventilation openings. Locate the display in a well-ventilated area without obstructions to intake or exhaust vents.
• Maintain 1 1/2" (30 cm) above, 1/2" (10 cm) on each side, and 1/2" (10 cm) below display to provide adequate ventilation.
Power Source, Power Cord, Plugs
• Make sure the power outlet used to power this display is readily accessible for fast disconnection, in case
of emergency.
• Do not use an outlet that has been damaged or has a non-standard power supply.
• Use the power cord provided.
• Ensure a good connection as you connect the power cord to a receptacle with a protective safety (earth) ground terminal.
• Ground Class 1 display.
• Use a surge-protected power strip. Do not overload wall outlets.
• Do not use the display with the power cord near water: for instance, near a bathtub, washbowl, kitchen sink or swimming pool, etc.
• Do not place any heavy objects on the power cord.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they
exit from the display.
• Unplug the display if you are not going to use it for an extensive period of time.
• Hold the plug, not the cord, when you disconnect the system.
• Keep power plug free of dusk and metal attachments.
• Unplug the display if you need to clean it with the included micro-fiber cleaning cloth. The screen may be wiped with the cleaning
cloth when the power is off. Never use alcohol, solvents or ammonia-based liquids on this display.
• Do not touch the power cord with wet hands.
Medical Concerns
• Rinse skin for 15 minutes, in the event that the LCD screen breaks and leeks onto skin.
• Use the display with adequate light. Insufficient light or continuous use may damage vision.
INF8630eAG / INF8630AG Hardware Guide
Page 5