Table of Contents
Advertisement
Setting or Changing the Handset Settings
Adjusting the Volume of
the Handset
Muting the Handset or
Headset Microphone
Setting or Changing the Handset Settings
You can set or change the handset settings by entering Menu Mode (press
for the following functions:
MDW 9040 Wireless Pocket Phone Installation, Troubleshooting, and Use, 503-801-190
The volume control is located on the side of the handset. This control raises (the " +"
button) and lowers the volume (the "
are four incremental volume levels. If the Ringer is enabled on the user menu, the
display indicates the current volume level with arrows (>>).
•
To raise or lower the Alerter (or Ringer) volume: While the MDW 9040 is
awake but on-hook, press the "+" or the "-" button. Each time you press the "+"
-
or "
" button, the handset makes a "chirping" sound, and the display shows the
current volume level:
Ringer:>>>
To raise or lower the volume of the Handset Receiver (or the Earpiece): While
•
the MDW 9040 is off-hook, press the press the "+" or the "-" button. Each time
you press the "+" or "
the display shows the current volume level:
Ear Level:>>>
To turn off the microphone associated with the handset or headset while the handset is
off-hook:
Press the Mute (
The microphone is turned off. The
Note:
If you press
The Mute function is also turned off when the handset goes on-hook or if
the user changes to another line.
•
From the CONFIGURE menu
~
Register your handset with the appropriate DRM
~
Select the Language in which the display message will appear
~
Choose the Length of the display Message (1 or 2 lines)
Using the MDW 9040 Pocket Phone
-
" button) of the Alerter and the Receiver. There
5
6
7
1
2
3
A
B
C
-
" button, the handset audio dial tone level changes, and
5
6
7
1
2
3
A
B
C
) button on the side of the handset.
icon lights.
a second time, the Mute function is turned off.
Menu
8
4
D
8
4
D
and completing the procedures
)
Issue 1, May 2000
3
31
Advertisement
Table of Contents
