Mounting Methods - ABB RET615 Product Manual

ABB
Transformer Protection and Control
RET615
Product version: 4.0
Table 63. Large display
1)
Character size
Small, mono-spaced (6x12 pixels)
Large, variable width (13x14 pixels)
1) Depending on the selected language

19. Mounting methods

By means of appropriate mounting accessories
the standard IED case for the 615 series IED can
be flush mounted, semi-flush mounted or wall
mounted. The flush mounted and wall mounted
IED cases can also be mounted in a tilted position
(25°) using special accessories.
Further, the IEDs can be mounted in any standard
19" instrument cabinet by means of 19" mounting
panels available with cut-outs for one or two
IEDs. Alternatively, the IED can be mounted in 19"
instrument cabinets by means of 4U Combiflex
equipment frames.
For the routine testing purposes, the IED cases
can be equipped with test switches, type RTXP
18, which can be mounted side by side with the
IED cases.
IECA070900 V4 EN
Figure 15. Flush mounting
Rows in the view
10
Mounting methods:
• Flush mounting
• Semi-flush mounting
• Semi-flush mounting in a 25° tilt
• Rack mounting
• Wall mounting
• Mounting to a 19" equipment frame
• Mounting with a RTXP 18 test switch to a
19" rack
Panel cut-out for flush mounting:
• Height: 161.5±1 mm
• Width: 165.5±1 mm
IECA070903 V4 EN
Figure 16. Semi-flush mounting
1MRS756891 F
Characters per row
8 8 or more
IECA070902 V4 EN
Figure 17. Semi-flush with a 25º
tilt
20
51