Mounting Methods; Modification Sales; Selection And Ordering Data - ABB REX640 Product Manual

REX640
Product version: 1

23. Mounting methods

With appropriate mounting accessories, the protection relay
can be rack mounted, wall mounted, roof mounted or door
mounted. The LHMI can be mounted either on a door or a
surface, or in a tilted position (25°) using special accessories. It
is also possible to rack mount or door mount the protection
relay together with the LHMI.
Mounting options for the relay:
• Rack mounting
• Rack mounting with the LHMI
• Wall mounting
• Roof mounting
• Door mounting
• Door mounting with the LHMI
Mounting options for the LHMI:
• Rack mounting
• Door mounting
• Mounting in a 25° tilt

24. Selection and ordering data

Use ABB Library to access the selection and ordering
information and to generate the order number.
Product Selection Tool (PST), a Next-Generation Order Number
Tool, supports order code creation for ABB Distribution
100
Automation IEC products with emphasis on, but not exclusively
for, the Relion product family. PST is an easy-to-use, online tool
always containing the latest product information. The complete
order code can be created with detailed specification and the
result can be printed and mailed. Registration is required.

25. Modification Sales

Modification Sales is a concept that provides modification
support for already delivered relays. Under Modification Sales it
is possible to modify both the hardware and software
capabilities of the existing relay. The same options are available
as when a new relay variant is configured and ordered from the
factory: it is possible to add new hardware modules into empty
slots, change the type of the existing modules within the slots or
add software functions by adding application and, if necessary,
add-on packages. If it is needed to use the possibilities
provided by the Modification Sales concept, please contact
your local ABB unit. The information that is requested by ABB is
a) Relay serial number, b) Relay order code and c) The
requested modification, separately stated for each relay.
Modification Sales is based on license handling within the relay.
Modifying the relay without proper new license from ABB puts
the relay in internal relay failure mode.
1MRS759144 A
ABB