2. Release the auger control to disengage the auger. The
auger must stop within 5 seconds after the auger control is
released. If it does not;
• Adjust the control cable. See Adjusting the Auger
Control Cable.
• If the auger still does not stop within 5 seconds, see an
authorized dealer.
NOTICE Do not overload the machine capacity by attempting
to clear snow at too fast of a rate.
10
Clearing a Clogged Discharge Chute
DANGER
The discharge chute contains a rotating auger to throw snow.
Fingers can quickly become caught in the auger resulting in
traumatic amputation or severe laceration. Never clear a
clogged discharge chute with your hands. Always use a
clean-out tool.
To safely clear a clogged discharge chute, follow these
instructions:
1. Stop the engine and remove the key.
2. Ensure that the auger has stopped rotating.
3. Use a clean-out tool to remove snow from the discharge
chute. Never clear a clogged discharge chute with your
hands!
Using the Headlight
Some models are equipped with a headlight to help illuminate
the area in front of the snowthrower. The headlight is on
whenever the engine is running. There is no switch.