Advertisement
&W0
Writes the operation state of the current modem in
Profile 0.
&W1
Writes the operation state of the current modem in
Profile 1.
Factory setting value:
AT&Zr=n
This command memorizes the telephone number following
&Zr (r = 0 to 3) in non-volatile memory. (The ATDSr
command reads this telephone number for dialing.)
The character string of a telephone number is the same as
how to describe the ATD command. In "n", up to 34 charac-
ters can be memorized including parameters and telephone
numbers.
P O I N T
All commands that follow &Z in the same command line are
ignored.
+++
This command shifts the current mode to command mode.
The character (+) of the command is specified using S2
register.
(It is not necessary to enter AT commands and carriage
return characters.)
38
Z, &F
Advertisement
