Advertisement
Enter the Bluetooth passkey (PIN code) using half-size
alphanumeric characters. The entered Bluetooth passkey
(PIN code) is displayed.
Enter the local device name if it is blank.
Click the [Next] button.
P O I N T
The device address and Bluetooth passkey (PIN code) are
described on the seal on the left side panel of the Modem
Station.
8. Click "Restart computer" and take out the Bluetooth
Modem Setup Tool floppy disk. Click the [End] button.
9. After Windows restarts, re-insert the Bluetooth Modem
Setup Tool floppy disk into the personal computer.
10. Click the [Start] button and then click [Settings] and
[Control panel].
11. Click [Modem], then click [Add].
13.
Click "Not detect to select modem from list" for
checking (@) and then click the [Next] button.
14. Click [Have Disk].
15. Confirm that "Copy source of source file" is (A:\), then
click the [OK] button. (Change the drive name of the
floppy disk, according to your personal computer used.)
16. Click
"FUJITSU
button.
17. Click
"Bluetooth Virtual COM Port (COM3)",
click the [Next] button.
FMWT-401", then click the [Next]
then
17
Advertisement
