Advertisement
P O I N T
Depending on the setting of your personal computer, COM3
may change to COM1 or COM2.
18. Click the [End] button.
19. Take out the floppy disk of the Bluetooth Modem Setup
Tool from the personal computer.
The installation of the Bluetooth Modem Setup Tool is now
complete.
Turning on the power
1. Push the power switch on the rear panel in the direction
indicated by the arrow in (Figure 9).
When the power is turned on, all status indicator lamps
blink for a few seconds and then the POWER lamp
lights green.
18
Figure 9. Turning on power
Advertisement
